KP182 150V 20A 200W Single Channel Electronic DC Load Tester Meter Internal Resistance Tester

Model: KP182 Power consumption: <20 W Load voltage: DC 1 -150 V Load current: 0-20A Load power: 0-200W measurement accuracy: Current: ±0.1%+5mA Voltage: ±0.1%+5mV control precision: Current: ±0.1%+5mA Voltage: ±0.1%+5mV Communication method: communication is not supported protection: Overvoltage (OV): greater than 152 V off load Over temperature (OT): 85 ° C Over power (OP): single channel 210W Power input fuse: 0.5A Ambient temperature range 0～500C Ambient humidity range: 10~90% RH DC input terminal to chassis withstand voltage: ±500VDC DC input to chassis insulation resistance: >20MΩ, 500VDC AC input to chassis insulation resistance: >20MΩ, 500VDC Dimensions (mm) L × B × H: about 300 × 90 × 190 Packing size: 38.5*16*27cm Weight: 3.5kg

• Load mode: low basic CC, CV, CW, CR four basic load modes, low input or reverse connection protection and alarm.
• High precision, high stability: optimized heat dissipation structure, high power density and digital control mode, high precision and good stability.
• Protection function: with over voltage, over current, power supply, over temperature protection function, low voltage remote measurement function;
• Auto test function: with external I / O trigger signal, PASS, FAIL command
• Multi-function test function: low 10 KHZ dynamic test function; low battery capacity test function; low battery internal resistance test function; low overcurrent protection point/time test function; low fan PWM control, low power switch 110 VAC use.